Extending electric solution to a detached garage or other outbuilding is not much different than adding a circuit inside the house, with one crucial exception—running underground cable.

Then running a circuit to a detached outbuilding is something you may be able to do yourself if you are sufficiently confident of your wiring skills that you would feel comfortable adding an electrical circuit ind rs. But remember that it involves work at the circuit that is main panel to set up and link more than one brand new circuit breakers. Lots of people elect to have this sort of work carried out by a professional, along with g d reason—work during the primary solution panel has got the prospect of extremely serious or fatal shock if you do not know very well what you are carrying out.

Nonetheless, even you can save a lot of money on the most labor-intensive part of the project—laying the underground cable from the house to the garage or outbuilding if you have an electrician make the final h kups at the service panel and connect the outlets and light fixtures in your garage.

Wire and Cable for Underground Lines

dating outside the box

There are a selection of ways electrical wiring can be run underground. The method you use may depend on what’s allowed or suggested by the regional Code authorities, so check always with the building that is local workplace to discover what is recommended in your community. Most of the time, though, the nationwide Electrical Code enables three method of running underground circuits

  • Laying UF feeder that is(underground cable directly into the fl r. This is referred to as direct burial, if you are doing this, the UF cable must be at least 24 ins below the area of this ground, to minimize the possibility associated with cable being pierced by routine shoveling. (more…)